After installing the Linksys extender, are you experiencing slow internet or connectivity issues in every room of your home or office? Don't worry; on this page, we'll show you five simple methods to enjoy speed in every part of your business and home. 

Verify If the Ethernet Connection Has Been Made Correctly and Firmly 

Before blaming the WiFi, make sure the internet entering your home is working properly. You can connect your computer to the extender directly using an Ethernet connection. If your laptop lacks an Ethernet port, you'll need a USB-to-Ethernet converter (Opens in a new window).

To see how fast your internet is, try a speed test (it opens in a new window). If your internet speed differs from the speed indicated on your bill, you may need to contact your ISP to replace your modem or extension. Even if your internet bill and speed test results match, it appears to be slow. Perhaps it is time to invest in a better plan. Try doing the test again wirelessly while standing close to the extender if everything seems to be in working condition. If you see comparable speeds adjacent to the extension but not elsewhere in the house, your WiFi coverage may be to blame. If your internet speed is still slow even though you are right next to the extension, you may have some outdated equipment. Something needs to be made better.

Update The Software (Firmware) Of The Device If Necessary

Before you start playing with settings, it's a good idea to update the extender's firmware. Extender producers are constantly improving software to obtain a little bit more speed. The manufacturer and type of your device will decide how easy or difficult it is to replace your software.

The update mechanism is immediately integrated into the administration interface of the vast majority of current extenders. So you only need to push a firmware upgrade button. Certain models, particularly older ones, still necessitate a visit to the manufacturer's website which is http ://extender.linksys.com. Download a firmware file from the extender's support page and then upload it to the administration interface. Even if it is time-consuming, it is a good idea because the problem is simple to correct.

Even if nothing is wrong with your wireless network, you should constantly update your firmware. for enhancements to the security, speed, and features. If you need help with this, we offer a guide on how to access your extender's settings. The Bold can investigate third-party firmware to maximize its current extension. Open-source extender for DD-WRT (Opens in a new window). This strategy will enhance performance and grant access to cutting-edge networking technologies. You may even install a VPN right on your extender. Although Linksys extender setup is a little more challenging, it might be worthwhile for tech-savvy customers.

Place Your WiFi Extender At The Best Possible Position

All households won't have an even distribution of WiFi signals. The reality is that your Wi-Fi coverage is significantly impacted by where your router and extension are located. It might make sense for the router to be concealed inside a cabinet and out of the way. That isn't typically the case, though it could be just where the wire enters the room. Instead, give the following advice some thought:

1. Place your wireless extender in an open location, away from walls and other barriers, to avoid interference and overheating.
2. Place your extension in the center of your home. If at all possible, the signal should be able to reach every room in the house.
3. Even removing one wall that separates your workspace from the extender can significantly improve performance.
4. Avoid operating powerful appliances or electronics nearby since this can affect WiFi performance.
5. To improve coverage, position the external antennas on your extender vertically.
6. Even placing the router and extension high on the wall and raising it may be advantageous. Go further up for a stronger signal.

You have access to a variety of tools to help you visualize your network coverage. That would show the strong and weak points of your WiFi network. Numerous mobile programs are also available, including WiFi Analyzer from Netgear (Opens in a new window).

Switch to Another Channel

Interference is a major issue, especially for people who live in heavily crowded areas. Signals from other wireless networks, as well as some landline phone lines, radios, and other electrical devices, might slow down speeds.

Have you ever utilized walkie-talkies as a kid? You may recall that in order for you to hear each other, the units needed to be on the same "channel." Also, if you and your neighbor are on the same channel, you may be able to overhear their conversation. Similarly, all contemporary routers may change channels while communicating with your devices.

Most routers allow you to choose the channel. If nearby wireless networks are indeed sharing the same channel, signal congestion will happen. Older routers might just select a present channel, while a decent device selects the least busy channel. It might be challenging. You may see the channels that nearby WiFi networks are utilizing on a Windows machine. To see everything, enter WLAN at the command prompt. You'll also receive a list of all local wireless networks and the active channels. The aforementioned network analyzers can also present this data, typically in a graphical format that is easier to understand.