There are few things as irritating as stepping into a bath and being greeted with a chilly blast of water, or opening the faucet for the perfect bath only to hear nothing but the gurgling sound of the unfilled hot water heater. Hot water is an integral element of our life, and if it fails and causes disruption, it could affect our routines and cause discomfort. But don’t fret, for this guide to repairs for hot water is here to help deal with hot water issues and bring comfort and warmth to your home.
Understanding Your Hot Water System
Before tackling repairs, you must be aware of the basics of the heating system. The majority of households use tanks-based water heaters or an in-line tank water heater. Here’s a quick overview of each.
Tank-based Water heater
This kind of heater stores and warms the water in a predetermined amount and is kept at a certain temperature. When you switch on the hot water faucet, the heated water is brought to you. If you’re running out of hot water it could be necessary to wait until the tank fills up and then reheat.
Tankless water heater
As opposed to tanks-based heaters Tankless systems heat water upon demand. They supply hot water immediately and don’t go out as long as there’s an ongoing supply of cold water, and the unit is to fit your home.
Common Hot Water Problems and Their Solutions
Let’s now look at some of the common hot water issues and the best ways to deal with them:
No Hot water
If you’re experiencing cold water, when you’re expecting hot, begin by checking your pilot’s light (if you’re using a gas heating system) and your circuit breaker (if you’re using the electric heating). Resetting or lighting the pilot and the circuit breaker could resolve the problem. However, if not it could be due to a defective temperature sensor or heater which could require repairs or replacement.
Insufficient Hot water                     Â
If you’re running low on hot water quicker than usual and your heater is tank-based, it might require flushing to eliminate accumulation of sediment. In the case of tankless heaters it’s simply a matter of altering your temperature or converting to a bigger model if your family’s consumption of hot water has grown.
Water that is Leaking
Leaks from a hot water tank can be an extremely serious problem. Shut off the gas or power supply as well as the water supply to the tank right away. Leaks usually indicate a damaged tank and will require replacement. Get a professional plumber to handle this task.
Strange Sounds
In the event that your tank makes strange sounds like popping or banging it could be due to the buildup of sediment. The flushing of the tank will often solve this problem. However, if it is done the sound could be an indication of a failed heating element or other internal issues.
Variable Temperatures
A fluctuating temperature of water is a hassle. It can be due to the thermostat being defective or by the accumulation of sediment inside the tank. Cleaning the tank and replacing the thermostat is often able to restore the same temperature.
Let’s move on to more information and advice regarding hot water repairs:
Discolored or Rusty Water
If you see discolored or rusty water coming from the hot water faucets, it could be an indication of corrosion within the water heater. It could be a sign that you are predisposed to leaks or other issues. In these instances it is recommended to speak with a licensed plumber to evaluate the severity of the issue and decide if a replacement is required.
Foul Odors
A foul odor from hot water is usually due to an abundance of bacteria within the tank. To stop this from happening it is possible to disinfect the tank by increasing temperatures to 140 degrees (60degC) for several hours. This will kill the bacteria. It is important to read the manual for your water heater to get information on how to regulate the temperature.
Pressure Relief Valve (PRV) Problems
This is an important security device that allows pressure to escape out of the tank. If it’s leaked or discharges water, it may be caused by high pressure inside the tank. Verify the water pressure at your home. It is supposed to be in the range of 40 to 80 psi. If it’s higher than that, think about installing an air pressure regulator. If the pressure regulator continues to leak, it may need replacement.
Conclusion
The issue of hot water can be disruptive to your day-to-day routine however, with a good understanding of your hot-water system and the typical issues that may arise, you’ll be better prepared to address these problems. Be aware that some repairs may be done by yourself, while others should be left to experts. Regular maintenance, such as flushing your tank-based heater, will help avoid issues and prolong the life of your equipment. With this helpful guide on hot water repairs, you’ll be on the way to a constantly warm and comfortable house.
