How To Clean Iphone Speaker In 5 Different Ways?

I am incrediblethoughts (incrediblethoughts57@gmail.com). I hold full responsibility for this content, which includes text, images, links, and files. The website administrator and team cannot be held accountable for this content. If there is anything you need to discuss, you can reach out to me via incrediblethoughts57@gmail.com email.

Disclaimer: The domain owner, admin and website staff of New York City US, had no role in the preparation of this post. New York City US, does not accept liability for any loss or damages caused by the use of any links, images, texts, files, or products, nor do we endorse any content posted in this website.

You want your iPhone to sound as nice as it can if you utilise the speaker-call feature or listen to music without AirPods. However, the speakers on your iPhone can start to seem muffled or less loud than before. If you observe those signs, that means you need to clean your speakers. Make sure that no debris, dirt, or other grime blocks the speakers in order to hear the greatest sound quality. In this write-up, we will discuss How To Clean iPhone Speaker in five different ways. 

How To Clean Iphone Speaker? 

1. Using Cotton Swabs 

Cotton swabs can be used to clean your iPhone speakers. Here’s how to use it – 

• Start by powering off your iPhone and ensuring it is unplugged from any power source. 
• Gently use a toothpick or SIM eject tool to loosen any large particles stuck in the speaker grilles. Avoid puncturing the delicate mesh. 
• Next, lightly moisten the tip of a cotton swab with rubbing alcohol.  
• Gently rub the swab back and forth across the iPhone’s earpiece and bottom speakers to dissolve grime. 
• Use a dry cotton swab to gently wipe away any remaining debris. 
• Ensure no cotton fibres are left behind. 
• Finally, allow the iPhone to fully air dry before powering it back on. 

2.         Using Painter’s Tape 

So, How To Clean iPhone Speaker? Painter’s tape allows you to safely remove debris without damaging the delicate mesh.  

• First, cut a piece of painter’s tape about 2 inches long. Fold one end over to create a non-sticky tab. 
• Then gently stick the tape over the iPhone’s earpiece and bottom speakers, pressing down firmly.
• Slowly peel back the tape at an angle. This will lift away dust and particles trapped in the speaker grilles.  
• You can reapply and remove the tape several times to get all the built-up dust. 
• Any remaining sticky residue can be rubbed away with your finger. 
• When finished, use a dry cotton swab to gently brush over the grilles to remove any last bits.  

3.         Using Air Blower 

Air blowers provide a safe, effective way to dislodge dust and debris that can build up in iPhone speakers over time. 

• First, power off your iPhone and ensure it is disconnected from any charging cables. 
• Hold the phone firmly and angle the speaker grilles toward you. 
• Insert the thin nozzle of the air blower 2-3 inches away from the mesh. 
• Try at various angles to blow air through the grilles. This will help dislodge any particles trapped within.
• Slowly move the nozzle back and forth across the earpiece and bottom speakers. 
• Deliver short blasts of air while adjusting the angle. 
• After blowing air through the speakers, use a dry cotton swab to gently brush over the grilles and remove any final debris. 
• You can also use a toothpick to gently tease out stubborn lint if needed.
• Examine the iPhone speakers closely. 
• If you are looking for How To Clean iPhone Speaker using an air blower, you must repeat air blowing in case any dust remains trapped in the mesh. 

4.         Using Soft-Bristled Brush 

If you want to know How To Clean iPhone Speaker safely, a soft brush is one of safest ways to remove dust without damaging the delicate mesh. 

• First, ensure your iPhone is powered off and disconnected from any charger. Have a toothpick ready to dislodge any large particles stuck in the grilles. 
• Next, gently brush across the earpiece and bottom speakers with light, repetitive strokes. 
• Move in various directions to dislodge debris. Avoid using forceful pressure or inserting the brush bristles into the grilles. 
• You can use a dry toothbrush, small makeup brush, or microfiber cloth depending on the softness you need. 
• Make sure to use a clean brush free of any makeup or chemical residues. 
• Check the speakers closely and re-brush any spots that need more cleaning. 
• Try the bristles at different angles to remove dust from within the mesh. 
• Once finished, use short blasts from an air blower to remove any final loose particles. 

5.         Using Silly Putty 

For those who are wondering How To Clean iPhone Speaker, Silly putty can be an effective tool for removing dust and lint from iPhone speakers. Here are the steps:

• Ensure your iPhone is turned off and disconnected from power. 
• Roll a small amount of silly putty into a ball slightly smaller than the iPhone’s speaker grilles. 
• Gently press the silly putty over the mesh and hold for 5 seconds. 
• Slowly peel away the silly putty. The sticky material will lift debris from the speaker grilles as it is removed. 
• You may need to re-press and remove the silly putty several times to thoroughly clean the speakers.
• Next, use a toothpick to gently dislodge any remaining particles. 
• Follow up by using a dry cotton swab to wipe away any stuck-on debris. 
• Examine the speakers closely under light and re-clean any spots that need it.